pylablib.devices.Cryomagnetics package¶
Submodules¶
pylablib.devices.Cryomagnetics.base module¶
-
exception
pylablib.devices.Cryomagnetics.base.
CryomagneticsError
[source]¶ Bases:
pylablib.core.devio.base.DeviceError
Generic Cryomagnetics devices error
-
args
¶
-
with_traceback
()¶ Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.
-
-
exception
pylablib.devices.Cryomagnetics.base.
CryomagneticsBackendError
(exc)[source]¶ Bases:
pylablib.devices.Cryomagnetics.base.CryomagneticsError
,pylablib.core.devio.comm_backend.DeviceBackendError
Generic Cryomagnetics backend communication error
-
args
¶
-
with_traceback
()¶ Exception.with_traceback(tb) – set self.__traceback__ to tb and return self.
-
-
class
pylablib.devices.Cryomagnetics.base.
LM500
(conn)[source]¶ Bases:
pylablib.core.devio.SCPI.SCPIDevice
Cryomagnetics LM500/510 level monitor.
Channels are enumerated from 1. To abort filling or reset a timeout, call
SCPIDevice.reset()
method.Parameters: conn – serial connection parameters (usually port or a tuple containing port and baudrate) -
Error
¶ alias of
CryomagneticsError
-
ReraiseError
¶ alias of
CryomagneticsBackendError
-
get_mode
(channel=None)[source]¶ Get measurement mode at the given channel (
None
for the currently selected channel).Can be either
'sample_hold'
, or'continuous'
.
-
set_mode
(mode, channel=None)[source]¶ Set measurement mode at the given channel (
None
for the current channel).Can be either
'sample_hold'
, or'continuous'
.
-
get_interval
(channel=None)[source]¶ Get measurement interval (in seconds) in sample/hold mode at the given channel (
None
for the current channel)
-
set_interval
(intvl, channel=None)[source]¶ Set measurement interval (in seconds) in sample/hold mode at the given channel (
None
for the current channel)
-
wait_for_measurement
(channel=None, timeout=None)[source]¶ Wait for the measurement on a given channel to finish
-
measure_level
(channel=None)[source]¶ Measure the level (perform the measurement and return the result) on a given channel
-
start_fill
(channel=None)[source]¶ Initialize filling at a given channel (
None
for the current channel)
-
get_fill_status
(channel=None)[source]¶ Get filling status at a given channels (
None
for the current channel).Return either
"off"
(filling is off),"timeout"
(filling timed out) or a float (time since filling started, in seconds).
-
get_low_level
(channel=None)[source]¶ Get low level (automated refill start) setting on a given channel (
None
for the current channel)
-
set_low_level
(level, channel=None)[source]¶ Set low level (automated refill start) setting on a given channel (
None
for the current channel)
-
get_high_level
(channel=None)[source]¶ Get high level (automated refill stop) setting on a given channel (
None
for the current channel)
-
set_high_level
(level, channel=None)[source]¶ Set high level (automated refill stop) setting on a given channel (
None
for the current channel)
-
BackendError
¶ alias of
pylablib.core.devio.comm_backend.DeviceBackendError
-
class
NoParameterCaller
(device, kind)¶ Bases:
object
Class to simplify calling functions without a parameter
-
apply_settings
(settings)¶ Apply the settings.
settings is a dict
{name: value}
of the available device settings. Non-applicable settings are ignored.
-
ask
(msg, data_type='string', delay=0.0, timeout=None, read_echo=False)¶ Write a message and read a reply.
msg is the query message, delay is the delay between write and read. Other parameters are the same as in
read()
. Ifread_echo==True
, assume that the device first echoes the input and skip it.
-
flush
(one_line=False)¶ Flush the read buffer (read all the available data and return the number of bytes read).
If
one_line==True
, read only a single line.
-
static
get_arg_type
(arg)¶ Autodetect argument type
-
get_device_variable
(key)¶ Get the value of a settings, status, or full info parameter
-
get_esr
(timeout=None)¶ Get the device status register (by default,
"*ESR?"
command)
-
get_full_info
(include=0)¶ Get dict
{name: value}
containing full device information (including status and settings).include specifies either a list of variables (only these variables are returned), a priority threshold (only values with the priority equal or higher are returned), or
"all"
(all available variables). Since the lowest priority is -10, settinginclude=-10
queries all available variables, which is equivalent toinclude="all"
.
-
get_full_status
(include=0)¶ Get dict
{name: value}
containing the device status (including settings).include specifies either a list of variables (only these variables are returned), a priority threshold (only values with the priority equal or higher are returned), or
"all"
(all available variables). Since the lowest priority is -10, settinginclude=-10
queries all available variables, which is equivalent toinclude="all"
.
-
get_id
(timeout=None)¶ Get the device IDN. (query SCPI
'*IDN?'
command)
-
get_settings
(include=0)¶ Get dict
{name: value}
containing all the device settings.include specifies either a list of variables (only these variables are returned), a priority threshold (only values with the priority equal or higher are returned), or
"all"
(all available variables). Since the lowest priority is -10, settinginclude=-10
queries all available variables, which is equivalent toinclude="all"
.
-
is_opened
()¶ Check if the device is connected
-
lock
(timeout=None)¶ Lock the access to the device from other threads/processes (isn’t necessarily implemented)
-
locking
(timeout=None)¶ Context manager for lock & unlock
-
open
()¶ Open the backend
-
static
parse_array_data
(data, fmt, include_header=False)¶ Parse the data returned by the device. fmt is
DataFormat
description in numpy format (e.g.,"<u2"
).If
include_header==True
, the data is assumed to be in a (somewhat) standard SCPI format:b'#'
, then a single digits
denoting length of the size block, thens
digits denoting length of the data (in bytes) followed by the actual data. Otherwise (include_header==False
), assume that the header is already removed.
-
read
(data_type='string', timeout=None)¶ Read data from the device.
data_type determines the type of the data. Can be
'raw'
(just raw data),'string'
(with trailing and leading spaces stripped),'int'
,'float'
,'bool'
(interprets0
or'off'
asFalse
, anything else asTrue
),'value'
(returns tuple(value, unit)
, where value is float), a callable (return the result of this callable applied to the string value), a dictionary (return the stored value corresponding to the string value, or to the value converted into integer if the string value is not present), or a list of data types (the result is treated as a list of values with the given types separated by commas). timeout overrides the default value.
-
read_binary_array_data
(include_header=False, timeout=None, flush_term=True)¶ Read a binary data in the from the device.
The data assumes the standard binary transfer header consisting of
"#"
symbol, then a single digit with the size of the length string, then the length string containing the length of the binary data (in bytes). Ifinclude_header==True
, return the data with the header; otherwise, return only the content. Ifflush_term==True
, flush the following line to skip terminator characters after the binary data, which are added by some devices. timeout overrides the default value.
-
reconnect
(new_instrument=True, ignore_error=True)¶ Remake the connection.
If
new_instrument==True
, create a new backend instance. Ifignore_error==True
, ignore errors on closing.
-
reset
()¶ Reset the device (by default,
"*RST"
command)
-
set_device_variable
(key, value)¶ Set the value of a settings parameter
-
sleep
(delay)¶ Wait for delay seconds
-
unlock
()¶ Unlock the access to the device from other threads/processes (isn’t necessarily implemented)
-
using_write_buffer
()¶ Context manager for using a write buffer.
While it’s active, all the consecutive
write()
operations are bundled together with;
delimiter. The actual write is performed at theread()
/ask()
operation or at the end of the block.
-
wait
(wait_type='sync', timeout=None, wait_callback=None)¶ Pause execution until device overlapped commands are complete.
wait_type is either
'sync'
(performwait_sync()
),'dev'
(performwait_dev()
) or'none'
(do nothing).
-
wait_dev
()¶ Pause execution of the device commands until device overlapped commands (e.g., taking sweeps) are complete.
Note that the code execution is not paused.
-
wait_sync
(timeout=None, wait_callback=None)¶ Pause execution of the script until device overlapped commands (e.g., taking sweeps) are complete.
timeout and wait_callback override default constructor parameters.
-
write
(msg, arg=None, arg_type=None, unit=None, bool_selector=None, wait_sync=None, read_echo=False, read_echo_delay=0.0)¶ Send a command.
Parameters: - msg (str) – Text message.
- arg – Optional argument to append in the end. If a list of arguments is supplied, the result is joined with
","
. - arg_type (str) – Argument type. Can be
'raw'
(in which case data is sent raw),'string'
,'int'
,'float'
,'bool'
, a format string (such as'{:.3f}'
) or a list of argument types (for an iterable argument); if format string is used and the argument is a list or a tuple, then it is expanded as a list of arguments (e.g.,arg_type='{0};{1}'
witharg=[1,2]
will produce a string'1;2'
); if a list of types is used, each element of arg is converted using the corresponding type, and the result is joined with","
. - unit (str) – If not
None
, use it as a unit to append after the value. - bool_selector (tuple) – A tuple
(false_value, true_value)
of two strings to represent bool argument; by default, use._bool_selector
attribute. - wait_sync – if
True
, append the sync command (specified as._wait_sync_comm
attribute,"*OPC?"
by default) after the message and pause the execution command is complete; useful in long set operations, where the device might ignore later inputs until the current command is complete; ifNone
, use the class default._default_write_sync
attribute (False
by default). - read_echo (bool) – If
True
, read a single line after write. - read_echo_delay (float) – The delay between write and read if
read_echo==True
.
-
-
class
pylablib.devices.Cryomagnetics.base.
LM510
(conn)[source]¶ Bases:
pylablib.devices.Cryomagnetics.base.LM500
Cryomagnetics 510 level monitor.
Compared to
LM500
, adds additional specific methods to enable/disable automatic refill.Channels are enumerated from 1. To abort filling or reset a timeout, call
SCPIDevice.reset()
method.Parameters: conn – serial connection parameters (usually port or a tuple containing port and baudrate) -
set_control_mode
(mode, channel=None)[source]¶ Set automated refill mode on a given channel (
None
for the current channel); can be"off"
or"auto"
-
BackendError
¶ alias of
pylablib.core.devio.comm_backend.DeviceBackendError
-
Error
¶ alias of
CryomagneticsError
-
class
NoParameterCaller
(device, kind)¶ Bases:
object
Class to simplify calling functions without a parameter
-
ReraiseError
¶ alias of
CryomagneticsBackendError
-
apply_settings
(settings)¶ Apply the settings.
settings is a dict
{name: value}
of the available device settings. Non-applicable settings are ignored.
-
ask
(msg, data_type='string', delay=0.0, timeout=None, read_echo=False)¶ Write a message and read a reply.
msg is the query message, delay is the delay between write and read. Other parameters are the same as in
read()
. Ifread_echo==True
, assume that the device first echoes the input and skip it.
-
close
()¶ Close connection to the device
-
flush
(one_line=False)¶ Flush the read buffer (read all the available data and return the number of bytes read).
If
one_line==True
, read only a single line.
-
static
get_arg_type
(arg)¶ Autodetect argument type
-
get_channel
()¶ Get current measurement channel
-
get_device_variable
(key)¶ Get the value of a settings, status, or full info parameter
-
get_esr
(timeout=None)¶ Get the device status register (by default,
"*ESR?"
command)
-
get_fill_status
(channel=None)¶ Get filling status at a given channels (
None
for the current channel).Return either
"off"
(filling is off),"timeout"
(filling timed out) or a float (time since filling started, in seconds).
-
get_full_info
(include=0)¶ Get dict
{name: value}
containing full device information (including status and settings).include specifies either a list of variables (only these variables are returned), a priority threshold (only values with the priority equal or higher are returned), or
"all"
(all available variables). Since the lowest priority is -10, settinginclude=-10
queries all available variables, which is equivalent toinclude="all"
.
-
get_full_status
(include=0)¶ Get dict
{name: value}
containing the device status (including settings).include specifies either a list of variables (only these variables are returned), a priority threshold (only values with the priority equal or higher are returned), or
"all"
(all available variables). Since the lowest priority is -10, settinginclude=-10
queries all available variables, which is equivalent toinclude="all"
.
-
get_high_level
(channel=None)¶ Get high level (automated refill stop) setting on a given channel (
None
for the current channel)
-
get_id
(timeout=None)¶ Get the device IDN. (query SCPI
'*IDN?'
command)
-
get_interval
(channel=None)¶ Get measurement interval (in seconds) in sample/hold mode at the given channel (
None
for the current channel)
-
get_level
(channel=None)¶ Get level reading on a given channel
-
get_low_level
(channel=None)¶ Get low level (automated refill start) setting on a given channel (
None
for the current channel)
-
get_mode
(channel=None)¶ Get measurement mode at the given channel (
None
for the currently selected channel).Can be either
'sample_hold'
, or'continuous'
.
-
get_settings
(include=0)¶ Get dict
{name: value}
containing all the device settings.include specifies either a list of variables (only these variables are returned), a priority threshold (only values with the priority equal or higher are returned), or
"all"
(all available variables). Since the lowest priority is -10, settinginclude=-10
queries all available variables, which is equivalent toinclude="all"
.
-
get_type
(channel=None)¶ Get type of a given channel (
"lhe"
or"ln"
)
-
is_opened
()¶ Check if the device is connected
-
lock
(timeout=None)¶ Lock the access to the device from other threads/processes (isn’t necessarily implemented)
-
locking
(timeout=None)¶ Context manager for lock & unlock
-
measure_level
(channel=None)¶ Measure the level (perform the measurement and return the result) on a given channel
-
open
()¶ Open the backend
-
static
parse_array_data
(data, fmt, include_header=False)¶ Parse the data returned by the device. fmt is
DataFormat
description in numpy format (e.g.,"<u2"
).If
include_header==True
, the data is assumed to be in a (somewhat) standard SCPI format:b'#'
, then a single digits
denoting length of the size block, thens
digits denoting length of the data (in bytes) followed by the actual data. Otherwise (include_header==False
), assume that the header is already removed.
-
read
(data_type='string', timeout=None)¶ Read data from the device.
data_type determines the type of the data. Can be
'raw'
(just raw data),'string'
(with trailing and leading spaces stripped),'int'
,'float'
,'bool'
(interprets0
or'off'
asFalse
, anything else asTrue
),'value'
(returns tuple(value, unit)
, where value is float), a callable (return the result of this callable applied to the string value), a dictionary (return the stored value corresponding to the string value, or to the value converted into integer if the string value is not present), or a list of data types (the result is treated as a list of values with the given types separated by commas). timeout overrides the default value.
-
read_binary_array_data
(include_header=False, timeout=None, flush_term=True)¶ Read a binary data in the from the device.
The data assumes the standard binary transfer header consisting of
"#"
symbol, then a single digit with the size of the length string, then the length string containing the length of the binary data (in bytes). Ifinclude_header==True
, return the data with the header; otherwise, return only the content. Ifflush_term==True
, flush the following line to skip terminator characters after the binary data, which are added by some devices. timeout overrides the default value.
-
reconnect
(new_instrument=True, ignore_error=True)¶ Remake the connection.
If
new_instrument==True
, create a new backend instance. Ifignore_error==True
, ignore errors on closing.
-
reset
()¶ Reset the device (by default,
"*RST"
command)
-
select_channel
(channel=1)¶ Select the current measurement channel
-
set_device_variable
(key, value)¶ Set the value of a settings parameter
-
set_high_level
(level, channel=None)¶ Set high level (automated refill stop) setting on a given channel (
None
for the current channel)
-
set_interval
(intvl, channel=None)¶ Set measurement interval (in seconds) in sample/hold mode at the given channel (
None
for the current channel)
-
set_low_level
(level, channel=None)¶ Set low level (automated refill start) setting on a given channel (
None
for the current channel)
-
set_mode
(mode, channel=None)¶ Set measurement mode at the given channel (
None
for the current channel).Can be either
'sample_hold'
, or'continuous'
.
-
sleep
(delay)¶ Wait for delay seconds
-
start_fill
(channel=None)¶ Initialize filling at a given channel (
None
for the current channel)
-
start_measurement
(channel=None)¶ Initialize measurement on a given channel
-
unlock
()¶ Unlock the access to the device from other threads/processes (isn’t necessarily implemented)
-
using_write_buffer
()¶ Context manager for using a write buffer.
While it’s active, all the consecutive
write()
operations are bundled together with;
delimiter. The actual write is performed at theread()
/ask()
operation or at the end of the block.
-
wait
(wait_type='sync', timeout=None, wait_callback=None)¶ Pause execution until device overlapped commands are complete.
wait_type is either
'sync'
(performwait_sync()
),'dev'
(performwait_dev()
) or'none'
(do nothing).
-
wait_dev
()¶ Pause execution of the device commands until device overlapped commands (e.g., taking sweeps) are complete.
Note that the code execution is not paused.
-
wait_for_measurement
(channel=None, timeout=None)¶ Wait for the measurement on a given channel to finish
-
wait_sync
(timeout=None, wait_callback=None)¶ Pause execution of the script until device overlapped commands (e.g., taking sweeps) are complete.
timeout and wait_callback override default constructor parameters.
-
write
(msg, arg=None, arg_type=None, unit=None, bool_selector=None, wait_sync=None, read_echo=False, read_echo_delay=0.0)¶ Send a command.
Parameters: - msg (str) – Text message.
- arg – Optional argument to append in the end. If a list of arguments is supplied, the result is joined with
","
. - arg_type (str) – Argument type. Can be
'raw'
(in which case data is sent raw),'string'
,'int'
,'float'
,'bool'
, a format string (such as'{:.3f}'
) or a list of argument types (for an iterable argument); if format string is used and the argument is a list or a tuple, then it is expanded as a list of arguments (e.g.,arg_type='{0};{1}'
witharg=[1,2]
will produce a string'1;2'
); if a list of types is used, each element of arg is converted using the corresponding type, and the result is joined with","
. - unit (str) – If not
None
, use it as a unit to append after the value. - bool_selector (tuple) – A tuple
(false_value, true_value)
of two strings to represent bool argument; by default, use._bool_selector
attribute. - wait_sync – if
True
, append the sync command (specified as._wait_sync_comm
attribute,"*OPC?"
by default) after the message and pause the execution command is complete; useful in long set operations, where the device might ignore later inputs until the current command is complete; ifNone
, use the class default._default_write_sync
attribute (False
by default). - read_echo (bool) – If
True
, read a single line after write. - read_echo_delay (float) – The delay between write and read if
read_echo==True
.
-